9-37
9
2. Lower the ATV to the ground.
3. Tighten the wheel bolts to the specified
torques.
EBU25721
Troubleshooting
Although Yamaha ATVs receive a thorough in-
spection before shipment from the factory, trouble
may occur during operation. Any problem in the
fuel, compression, or ignition systems, for exam-
ple, can cause poor starting and loss of power.
The following troubleshooting chart represents a
quick and easy procedure for checking these vital
systems yourself. However, should your ATV re-
quire any repair, take it to a Yamaha dealer, whose
skilled technicians have the necessary tools, ex-
perience, and know-how to service the ATV prop-
erly.
Use only genuine Yamaha replacement parts. Im-
itation parts may look like Yamaha parts, but they
are often inferior, have a shorter service life and
can lead to expensive repair bills.
WARNING
EWB02281
Do not smoke when checking the fuel system.
Fuel can ignite or explode, causing severe inju-
ry or property damage. Make sure there are no
open flames or sparks in the area, including pi-
lot lights from water heaters or furnaces.
1. Arrow mark
2. Forward rotating direction
3. Wheel bolt
Tightening torques:
Front wheel bolt:
45 N·m (4.5 kgf·m, 33 lb·ft)
Rear wheel bolt:
45 N·m (4.5 kgf·m, 33 lb·ft)
3
1
2
UBW415E0.book Page 37 Monday, June 7, 2021 1:01 PM
