Yamaha YFZ 50 Owner'S Manual Download Page 113

Page: 113 / 132

9-36

3. Remove the blown fuse, and then install a

new fuse of the specified amperage.

WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.

[EWB02173]

4. Turn on the main switch and start the engine.
5. Install the panel.
6. If the fuse immediately blows again, have a

Yamaha dealer check the vehicle.

EBU34030

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel bolts.

3. Elevate the ATV and place a suitable stand

under the frame.

4. Remove the bolts from the wheel.
5. Remove the wheel.

EBU34042

Installing a wheel

1. Install the wheel with the arrow mark pointing

in the forward rotating direction of the wheel,
and then install the wheel bolts.

Specified fuse:

7.5 A

1. Wheel bolt

UBW415E0.book Page 36 Monday, June 7, 2021 1:01 PM

Summary of Contents for YFZ 50





































































































































Search results

Summary of Contents for YFZ 50

Reviews:

Related manuals for YFZ 50

Brands by name

Popular brands

Yamaha YFZ 50, Owner'S Manual

Search results

Summary of Contents for YFZ 50

Reviews:

Related manuals for YFZ 50

Brands by name

Popular brands