Yamaha YFM80RX Owner'S Manual Download Page 92

Page: 92 / 116

8-24

1. Loosen the locknut at the brake lever.
2. Turn the brake lever free play adjusting bolt at

the brake lever in direction (a) to increase the
free play, and in direction (b) to decrease it.

3. Tighten the locknut at the brake lever.

If the specified free play cannot be obtained,
proceed with the following steps.

4. Loosen the locknut at the brake lever.
5. Fully turn the adjusting bolt at the brake lever

in direction (a) to loosen the brake cable.

6. To increase the brake lever free play, turn the

adjusting nut on the brake cable at the rear
wheel hub in direction (a), and to decrease it,
turn the nut in direction (b).

7. Tighten the locknut at the crankcase and the

brake lever.

NOTE:

If the specified free play cannot be obtained as de-
scribed above or if the rear brake does not operate
correctly, have a Yamaha dealer check the internal
rear brake mechanism.
When adjusting the rear brake lever free play:

●

Be sure not to step on the brake pedal.

1. Locknut
2. Brake lever free play adjusting bolt
3. Brake lever free play

1 2

(a)

(b)

1. Brake lever free play adjusting nut

(a)

(b)

Summary of Contents for YFM80RX





















































































































Search results

Summary of Contents for YFM80RX

Reviews:

Related manuals for YFM80RX

Brands by name

Popular brands

Yamaha YFM80RX, Owner'S Manual

Search results

Summary of Contents for YFM80RX

Reviews:

Related manuals for YFM80RX

Brands by name

Popular brands