Yamaha YFM80RX Owner'S Manual Download Page 93

Page: 93 / 116

8-25

●

Make sure the brake pedal does not move.

Adjusting the brake pedal free play

The brake pedal free play should measure 20.0–
30.0 mm (0.79–1.18 in) as shown. If the free play
is incorrect, adjust it as follows.

Turn the brake pedal free play adjusting nut on the
brake rod at the rear wheel hub in direction (a) to
increase the free play, and in direction (b) to de-
crease it.

WARNING

EWB02080

Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability,
which could lead to an accident.
After servicing:

●

Make sure the brakes operate smoothly and
that the free play is correct.

●

Make sure the brakes do not drag.

Replacement of brake components requires
professional knowledge. These procedures

should be performed by a Yamaha dealer.

1. Brake pedal free play

1. Brake pedal free play adjusting nut

(a)

(b)

Summary of Contents for YFM80RX





















































































































Search results

Summary of Contents for YFM80RX

Reviews:

Related manuals for YFM80RX

Brands by name

Popular brands

Yamaha YFM80RX, Owner'S Manual

Search results

Summary of Contents for YFM80RX

Reviews:

Related manuals for YFM80RX

Brands by name

Popular brands