Yamaha YFM66FGX Owner'S Manual Download

Page: 159 / 180

10-1

EBU25960

SPECIFICATIONS

Dimensions:

Overall length:

2085 mm (82.1 in)

Overall width:

1150 mm (45.3 in)

Overall height:

1210 mm (47.6 in)

Seat height:

880 mm (34.6 in)

Wheelbase:

1275 mm (50.2 in)

Ground clearance:

275 mm (10.8 in)

Minimum turning radius:

3200 mm (126 in)

Weight:

With oil and fuel:

290.0 kg (639 lb)

Engine:

Engine type:

Liquid cooled 4-stroke, SOHC

Cylinder arrangement:

Forward-inclined single cylinder

Displacement:

660.0 cm³

Bore

stroke:

100.0

84.0 mm (3.94

3.31 in)

Compression ratio:

9.10 :1

Starting system:

Electric and recoil starter

Lubrication system:

Wet sump

Engine oil:

Type:

YAMALUBE 4, SAE5W30 or SAE10W30 or SAE20W40

Recommended engine oil grade:

API service SG type or higher, JASO standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

1.90 L (2.01 US qt) (1.67 Imp.qt)

0˚

10˚

30˚

50˚

70˚

90˚

110˚

130˚F

YAMALUBE 4 (10W30) or SAE 10W30

YAMALUBE 4-CW (5W30) or SAE 5W30

-20˚

-10˚

0˚

10˚

20˚

30˚

40˚

50˚C

YAMALUBE 4 (20W40) or SAE 20W40

U23D10E0.book Page 1 Wednesday, March 14, 2007 1:50 PM

Summary of Contents for YFM66FGX





















































































































































































Search results

Summary of Contents for YFM66FGX

Reviews:

Related manuals for YFM66FGX

Brands by name

Popular brands

Yamaha YFM66FGX, Owner'S Manual

Search results

Summary of Contents for YFM66FGX

Reviews:

Related manuals for YFM66FGX

Brands by name

Popular brands