Yamaha YFM660FS, Supplementary Service Manual

Page: 258 / 478

4 - 45
ENG
RECOIL STARTER AND AC MAGNETO
2.Install:
●
Woodruff key
●
CDI rotor
NOTE:
●
Before installing the rotor, clean the outside
of the crankshaft and the inside of the rotor.
●
After installing the rotor, check that the rotor
rotates smoothly. If not, reinstall the key and
rotor.
3.Install:
●
Dowel pins
●
Gasket
●
Crankcase cover (left)
NOTE:
●
When installing the crankcase cover (left),
use a long rod to hold the CDI rotor in posi-
tion from the outside. This will make assem-
bly easier. Be careful not to damage the oil
seal.
●
Tighten the bolts in stages, using a criss-
cross pattern.
New
T
R
.
.
10 Nm (1.0 m • kg, 7.2 ft • lb)
4.Install:
●
Starter pulley
1
NOTE:
Use a rotor holding tool
2
to hold the starter
pulley.
NOTE:
Before installing the starter pulley, do not for-
get to install the O-ring.
Rotor holding tool:
P/N. YU-01235, 90890-01235
T
R
.
.
55 Nm (5.5 m • kg, 40 ft • lb)