Yamaha YFM660FS, Supplementary Service Manual

Page: 193 / 478

3 - 46
CHK
ADJ
ADJUSTING THE SELECT LEVER
CONTROL CABLE AND SHIFT ROD
ADJUSTING THE SELECT LEVER
CONTROL CABLE AND SHIFT ROD
1
NEUTRAL
2
HIGH
3
LOW
4
REVERSE
5
PARK
6
Control cable
7
Select lever shift rod
WARNING
Before moving the select lever, bring the
machine to a complete stop and return the
throttle lever to its closed position. Other-
wise the transmission may be damaged.
1.Adjust:
●
Rear brake pedal free play
Refer to “ADJUSTING THE REAR BRAKE”.
2.Adjust:
●
Select lever control cable
●
Select lever shift rod
*****************************************************
Adjustment steps:
Control cable:
●
Make sure the select lever is in NEUTRAL.
●
Adjust the control cable so there is zero free
play in the cable. When the adjustment is
correct, slack in the return spring
1
will be
taken up.
NOTE:
In some cases it will be necessary to further
adjust the cable with the locknuts
2
arrange-
ment that holds the cable to its mount.
●
When the brake begins to work “
a
= 25 ~
40 mm (1.0 ~ 1.6 in)”, verify that the select
lever can be shifted to REVERSE from NEU-
TRAL, to PARK from REVERSE and to
NEUTRAL from REVERSE.
●
Before the brake begins to work “
a
= 0 ~
25 mm (0 ~ 1.0 in)”, verify that the select
lever cannot be shifted to REVERSE from
NEUTRAL, to REVERSE from PARK and to
NEUTRAL from REVERSE.