Yamaha YFM45FAR, Service Manual

Page: 101 / 405

3 - 32
CHK
ADJ
CHANGING THE COOLANT
CAUTION:
●
Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant, check,
and if necessary, correct the antifreeze
concentration of the coolant.
●
Use only distilled water. However, soft
water may be used if distilled water is not
available.
●
If coolant comes into contact with painted
surfaces, immediately wash them with
water.
●
Do not mix different types of antifreeze.
13.Install:
●
Radiator cap
14.Fill:
●
Coolant reservoir
(with the recommended coolant to the
maximum level mark
a
)
15.Install:
●
Coolant reservoir cap
16.Start the engine, warm it up for several
minutes, and then turn it off.
17.Check:
●
Coolant level
Refer to “CHECKING THE COOLANT
LEVEL”.
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
18.Install:
●
Left footrest board
Refer to “FOOTREST BOARDS”.
●
Front fender
●
Engine skid plate
●
Front carrier
●
Engine side cover
●
Fuel tank side panel (left)
●
Seat
Refer to “SEAT, CARRIERS, FENDERS
AND FUEL TANK”.