5
En
■
Troubleshooting
Check the following if this unit should not be operating properly (if noise is output or if the unit
malfunctions):
Cause
Remedy
Incomplete connection
Check the connection of the YBA-10 compatible
component (AV receiver, etc.) and dock connection
cable.
Check the connection of this unit and dock connection
cable.
The device with which you are trying to exchange
signals is not compatible with A2DP or AVRCP.
Use an A2DP or AVRCP-compatible device.
The device with which you are trying to exchange
signals and this unit are too far apart.
Install in the same room within a line-of-sight
distance of 10 m (33 ft) and with no obstacles.
There is an obstacle between the device with which
you are trying to exchange signals and this unit.
There is a device emitting electromagnetic waves in
the 2.4 GHz band nearby (microwave oven, wireless
LAN device, etc.).
Move this unit away from the device.
Pairing has not been properly performed.
Refer to the operating instructions of the YBA-10
compatible component (AV receiver, etc.) and
perform the pairing operation over.
The device with which you are trying to communicate
is not sending Bluetooth signals to this unit.
Check whether the device with which you are trying
to communicate is properly set.
00_YBA-10.book Page 5 Wednesday, February 6, 2008 10:49 AM
