3
En
■
Installation
Install in a stable place, being careful of the
following points:
•
Do not place on top of steel or other metal
plates.
•
Do not cover with a cloth, etc.
•
Install in the same room as the device with
which signals are to be exchanged (Bluetooth
profile A2DP or AVRCP-compatible portable
music player, mobile phone, etc.) within a
direct, line-of-sight distance of 10 m (33 ft).
•
Make sure there are no obstacles between this
unit and the other device.
■
Pairing
Pairing must be performed when making
Bluetooth connections for the first time or if the
pairing information has been deleted.
Pairing refers to the operation of registering the
device with which signals are to be exchanged
(Bluetooth profile A2DP or AVRCP-compatible
portable music player, mobile phone, etc.) on this
unit.
For pairing, see the operating instructions of the
YBA-10 compatible component (AV receiver,
etc.) to which YBA-10 is connected.
•
This unit can be paired with up to eight other
components. When pairing is conducted
successfully with a ninth component and the
pairing data is registered, the pairing data for
the least recently used other component is
cleared.
•
This unit is compatible with the Bluetooth
A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio and Video Remote Control
Profile) profiles, but depending on the type of
AV receiver connected to this unit and the
Bluetooth-compatible player you are using, it
may not be possible to use all of the AVRCP
control functions.
Within 10 m (33 ft)
Notes
00_YBA-10.book Page 3 Wednesday, February 6, 2008 10:49 AM
