Yamaha yahama PSR - 520, Owner'S Manual

Page: 90 / 102

89
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
*1 PSR-520 ordinarily functions as 16 MIDI channel multi-timbral tone
generator controlled by MIDI reception data. Panel voices and the
other panel settings are not affected by the MIDI message, except-
ing the followings:
MIDI Master Tuning
System Exclusive Message for controlling Reverb, Chorus and
Dsp
The Remote Channel can be designated by the panel settings. The
designated channel on the PSR-520 can be controlled by an exter-
nal device and receive all the data excepting the following control
change data:
Data entry, MSB, LSB
Portamento control
Data increment
Data decrement
NRPN LSB, MSB
RPN LSB, MSB
*2 Bank Select MSB
The bank select MSB is used for melody voice and rhythm voice
switching.
MSB 00H: Melody voice.
MSB 7FH: Rhythm voice.
Transmission: Transmitted when changing the voice, style and
song.
Reception: All channels except10 channel receive this message.
( 10 channel is fixed at rhythm voice.). But when 10 channel is set
for the remote channel or receives XG System On message, 10
channel receives this message and the rhythm voice can change
to the melody voice.
Bank Select LSB
This message is used to correspond to the panel voice numbers
higher than 128.
Bank Select LSB=00H: program change numbers 0~127 corre-
spond to the panel voice numbers 1~128.
Bank Select LSB=01H: program change numbers 0~12 corre-
spond to the panel voice numbers 129~141.
Transmission: Transmitted when changing the voice, style and
song.
Reception: This message can be received only at the channel
designated as the remote channel or the panel voice.
No voice change will occur when only a bank select is received.
When a program change is received the latest bank select value is
used.
*3 These Control Change messages are not transmitted by the PSR-
520 panel operation, but may be transmitted by the accompani-
ment style playing.
*4 NRPN transmission/reception
The following parameters are supported.
NRPN Data entry
MSB LSB MSB LSB Parameter Name/Range Default
01H 08H mmH - - Vibrato Rate 40H
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 09H mmH - - Vibrato Depth 40H
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 0AH mmH - - Vibrato Delay 40H
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 20H mmH - - Filter Cutoff Freq. 40H
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 21H mmH - - Filter Resonance 40H
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 63H mmH - - EG Attack Time 40H
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 64H mmH - - EG Decay Time 40H
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 66H mmH - - EG Release TIme 40H
mm: 00H - 40H - 7FH (-64 - 0 - +63)
14H rrH mmH - - Drum Filter Cutoff Freq. 40H
rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)
15H rrH mmH - - Drum Filter Resonance 40H
rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)
16H rrH mmH - - Drum EG Attack Rate 40H
rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)
17H rrH mmH - - Drum EG Decay Rate 40H
rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)
18H rrH mmH - - Drum Instrument Pitch Course 40H
rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)
19H rrH mmH - - Drum Instrument Pitch Fine 40H
rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)
1AH rrH mmH - - Drum Instrument Level Depends on note
rr: drum instrument note number mm: 00H - 7FH (0 - 127)
1CH rrH mmH - - Drum Instrument Panpot Depends on note
rr: drum instrument note number mm: 00H - 40H - 7FH (L - Center - R)
1DH rrH mmH - - Drum Instrument Reverb Send Level Depends on note
rr: drum instrument note number mm: 00H - 7FH (0 - 127)
1EH rrH mmH - - Drum Instrument Chorus Send Level Depends on note
rr: drum instrument note number mm: 00H - 7FH (0 - 127)
1FH rrH mmH - - Drum Instrument DSP Send Level 7FH
rr: drum instrument note number mm : 00H - 7FH (0 - 127)
Data entry LSB is ignored.
*5 RPN transmission/reception
The following parameters are supported.
RPN Data entry
MSB LSB MSB LSB Parameter Name/Range Default
00H 00H mmH - - Pitch bend Sensitivity 02H
mm: 00H - 02H - 0CH (0 - 2 - 12)
00H 01H mmH - - Fine Tuning 40H
mm: 00H - 40H - 7FH (-64 - 0 - +63)
00H 02H mmH - - Course Tuning 40H
mm: 00H - 40H - 7FH (-64 - 0 - +63)
7FH 7FH - - - - RPN Null - -
Clears current RPN and NRPN number settings.
Data entry LSB is ignored.
*6 Not transmitted when Song and Accompaniment is playing.
*7 Pitch Bend, modulation, expression, sustain, sostenuto and
softpedal are returned to their defult values.
Clears current RPN and NRPN number settings.
Resets portament source note number.
*8 129~141 voice numbers are selectable through an appropriate
Bank Select setting (Refer to *2).
*9 When the External Clock is turned ON by PSR-520 panel setting,
Clock, Start/Stop message will be received.
The start/stop of the song recording and playback will be controlled
by the external device. The initial set up data is transmitted before
the song playback, so that the start may be delayed.
MIDI Implementation Chart