16
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Playing the PSR-520
Function
Description
Split
Voice
The split voice can be changed as required while the number
and name of the current split voice appear on the top line of
the display.
S.Volume
Sets the volume of the split voice so you can create the opti-
mum blend with the right-hand voice. The volume range is
from “00” (no sound) to “127” (maximum split voice volume).
S.Octave
Shifts the pitch of the split voice up or down one or two oc-
taves. “–1” is down one octave, “–2” is down two octaves; “+1”
and “+2” are up one and two octaves, respectively.
S.RevLvl
Sets the reverb send level for the split voice. The reverb send
level determines the amount of signals input to the reverb
effect. The level range is from “00” (no effect) to “127” (maxi-
mum effect).
S.ChoLvl
Sets the chorus send level for the split voice. The chorus send
level determines the amount of signals input to the chorus
effect. The level range is from “00” (no effect) to “127” (maxi-
mum effect).
S.Pan
Positions the split voice in the stereo sound field. The pan
range is from “–7” to “+7”. “–7” is full left and “+7” is full right.
S.Split
Sets the keyboard split point — i.e. the key that separates the
left- and right-hand voices (the split-point key is included in the
left-hand section of the keyboard). Simply press the key you
want to assign as the split point. The key number of the key
you press will appear to the left of “S.Split” on the top line of
the display. You can also use the [–/NO] and [+/YES] buttons,
the number buttons or the data dial to enter the split point key
number. The lowest key on the keyboard (C1) is key number
“36”, middle C (C3) is “60”, and the highest key (C6) is 96. The
split point can be set at any key number from 00 through 127,
allowing the split point to be set outside the range of the PSR-
520 keyboard for MIDI applications. The default split point is
59 (B2).
CURSOR
–/NO
+
/ YES
6
5
4
0
7
8
9
1
2
3
1– –
*
*
• If the Voice Set function is ON
(page 69), the Split Voice param-
eters will change automatically
whenever a different keyboard
voice is selected.
• The selected Split Voice param-
eter can be reset to its default
value by simultaneously pressing
the [–/NO] and [+/YES] buttons.
• Negative values with “S.Octave”
and “S.Pan” parameters can be
entered by pressing the number
buttons while holding the [–/NO]
button.
• Reverb return level and chorus
return level can be changed via
the “RevRtnLv” and “ChoRtnLv”
function in the DIGITAL EFFECT
function — see pages 25 and 27.
3
Exit
.........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
SPLIT VOICE function.
Summary of Contents for yahama PSR - 520
Page 1: ......
Page 101: ...Address List...
Page 102: ...M D G EMI Division 1995 Yamaha Corporation VT95500 506POCP5 3 01A0 Printed in Japan...
