Yamaha XVS1300AF Owner'S Manual Download Page 75

Page: 75 / 94

PERIODIC MAINTENANCE AND ADJUSTMENT

7-32

EAU42874

Replacin

the auxiliary li

If the auxiliary light bulb burns out, re-
place it as follows.

1. Remove the headlight unit. (See

page 7-30.)

2. Remove the auxiliary light bulb

socket (together with the coupler
and bulb) by turning the socket
counterclockwise.

3. Remove the burnt-out bulb by

pulling it out.

4. Insert a new bulb into the socket.
5. Install the socket (together with

the coupler and bulb) by pushing it
in and turning it clockwise.

6. Install the headlight unit.

EAU24285

Replacin

a turn si

nal li

or the tail/

rake li

1. Remove the lens by removing the

screws.

1. Auxiliary light bulb socket

1. Auxiliary light bulb

1. Screw

U12C28E0.book Page 32 Wednesday, July 2, 2014 3:29 PM

Summary of Contents for XVS1300AF































































































Search results

Summary of Contents for XVS1300AF

Reviews:

Related manuals for XVS1300AF

Brands by name

Popular brands

Yamaha XVS1300AF, Owner'S Manual

Search results

Summary of Contents for XVS1300AF

Reviews:

Related manuals for XVS1300AF

Brands by name

Popular brands