PERIODIC MAINTENANCE AND ADJUSTMENT
7-30
7
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAU42895
Replacin
g
the hea
d
li
g
ht
b
ul
b
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA10651
Take care not to
d
ama
g
e the follow-
in
g
parts:
Hea
d
li
g
ht
b
ul
b
Do not touch the
g
lass part of
the hea
d
li
g
ht
b
ul
b
to keep it free
from oil, otherwise the transpar-
ency of the
g
lass, the luminosity
of the
b
ul
b
, an
d
the
b
ul
b
life will
b
e a
d
versely affecte
d
. Thor-
ou
g
hly clean off any
d
irt an
d
fin-
g
erprints on the hea
d
li
g
ht
b
ul
b
usin
g
a cloth moistene
d
with al-
cohol or thinner.
Hea
d
li
g
ht lens
Do not affix any type of tinte
d
film or stickers to the hea
d
li
g
ht
lens.
Do not use a hea
d
li
g
ht
b
ul
b
of a
watta
g
e hi
g
her than specifie
d
.
1. Remove the turn signal light
bracket cover by removing the
bolts.
2. Remove the headlight unit by re-
moving the bolts on each side.
Specifie
d
fuses:
Main fuse:
50.0 A
Headlight fuse:
20.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
15.0 A
Parking lighting fuse:
10.0 A
Radiator fan motor fuse:
20.0 A
Fuel injection system fuse:
10.0 A
Backup fuse:
10.0 A
1. Do not touch the glass part of the bulb.
1. Turn signal light bracket cover
2. Bolt
1
2
2
U12C28E0.book Page 30 Wednesday, July 2, 2014 3:29 PM