5 - 96
ENG
CRANKCASE
EAS00386
DISASSEMBLING THE CRANKCASE
NOTE:
_
Loosen the generator shaft bolt before remov-
ing the generator rotor.
1. Remove:
• generator shaft bolt
1
NOTE:
_
While the holding the generator rotor
2
with
the primary sheave holder
3
, loosen the gen-
erator shaft bolt.
Primary sheave holder
YS-01880-A
2. Remove:
• crankcase bolts
• holder
NOTE:
_
• Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
• Loosen the bolts in decreasing numerical
order (refer to the numbers in the illustra-
tion).
• The numbers embossed on the crankcase
indicate the crankcase tightening sequence.
È
Right crankcase
É
Left crankcase
M8
×
100 mm bolts:
1
,
2
M8
×
80 mm bolt:
3
M6
×
105 mm bolt:
K
M6
×
85 mm bolts:
9
,
C
M6
×
75 mm bolts:
D
,
E
M6
×
60 mm bolts:
4
~
7
M6
×
40 mm bolts:
8
,
0
~
B
,
F
~
J
È
É
