4 - 67
CHAS
FRONT FORK
k. Remove the rod holder and fork spring com-
pressor.
CAUTION:
_
The fork spring is compressed.
Always use a new cap bolt O-ring.
▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
16.Install:
• cap bolt
(onto the outer tube)
NOTE:
_
Temporary tighten the cap bolt.
EAS00662
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
• front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
NOTE:
_
Make sure the outer fork tube is flush with the
top of the upper bracket.
2. Tighten:
• lower bracket pinch bolts
1
• turn signal light bracket pinch bolt
2
• cap bolt
3
• upper bracket pinch bolts
4
WARNING
_
Make sure the brake hoses are routed prop-
erly.
1
2
3
4
T
R
.
.
23 Nm (2.3 m • kg, 17 ft • lb)
T
R
.
.
7 Nm (0.7 m • kg, 5.1 ft • lb)
T
R
.
.
23 Nm (2.3 m • kg, 17 ft • lb)
T
R
.
.
26 Nm (2.6 m • kg, 19 ft • lb)
