Yamaha XT1200ZF Owner'S Manual Download | Manualshive

Page: 23 / 118

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-8

3



Apply the front or rear brake.



Disengage the clutch.

Push the power switch to turn off the
cruise control system. The “

” indica-

tor light and the “SET” indicator light
will go off.

TIP

Traveling speed decreases as soon as
the cruise control system is deactivat-
ed; unless the throttle grip is turned.

Usin

g

the resume function

Push the “RES+” side of the cruise
control setting switch to reactivate the
cruise control system. The traveling

speed will return to the previously set
cruising speed. The “SET” indicator
light will come on.

WARNING

EWA16351

It is

d

an

g

erous to use the resume

function when the previously set
cruisin

g

spee

d

is too hi

g

h for current

con

d

itions.

TIP



The resume function operates
when riding in 3rd gear at speeds
between about 50 km/h (31 mi/h)
and 100 km/h (62 mi/h), 4th gear
at speeds between about 50 km/h
(31 mi/h) and 150 km/h (93 mi/h),
or 5th or 6th gear at speeds be-
tween about 50 km/h (31 mi/h)
and 180 km/h (112 mi/h).



Pushing the power switch while
the system is operating will turn
the system off completely and
erase the previously set cruising
speed. You will not be able to use
the resume function until a new
cruising speed has been set.

Automatic deactivation of the cruise
control system
The cruise control system for this mod-
el is electronically controlled and is
linked with the other control systems.
The cruise control system will auto-
matically become deactivated under
the following conditions:



The cruise control system is not
able to maintain the set cruising
speed.



Wheel slip or wheel spin is detect-
ed. (If the traction control system
has not been turned off, the trac-
tion control system will work.)



The start/engine stop switch is set
to the “

” position.



The engine stalls.



The sidestand is lowered.

When traveling with a set cruising
speed, if the cruise control system is
deactivated under the above condi-
tions, the “

” indicator light will go off

and the “SET” indicator light will flash
for 4 seconds, and then go off.
When not traveling with a set cruising
speed, if the start/engine stop switch is
set to the “

” position, the engine

1. Closed position
2. Cruise control cancel direction

2

1

U2BSE1E0.book Page 8 Thursday, July 31, 2014 4:31 PM

«
...
21
22
23
24
25
...
»

Summary of Contents for XT1200ZF























































































































Reviews:

No comments

Related manuals for XT1200ZF

TXT PRO - PART LIST 2010

Brand: GAS GAS Pages: 64

Brand: hepco & becker Pages: 4

Freeride 350 AUS

Brand: KTM Pages: 25

2001 GSX1300RK1 HAYABUSA

Brand: Suzuki Pages: 31

Brand: PEUGEOT Pages: 12

MULTISTRADA 1200S

Brand: Ducati Pages: 311

STAR XV19CSX(C)

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 100

Star XV250B 2011

Brand: Yamaha Pages: 98

Brand: DYNATEK Pages: 5

Brand: Magna Pages: 223

Brand: rizoma Pages: 10

Brand: rizoma Pages: 16

Sport 1 180 - 487.3

Brand: CZ Pages: 42

Brand: Starke Pages: 20

Brand: APRILIA Pages: 151

Brand: Benelli Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands