INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
Information
d
isplay
There are 3 information displays. The
selected information display can be
switched by pushing the select switch.
The following items are shown in the
information displays:
an odometer display
tripmeter displays
a fuel reserve tripmeter display
an estimated traveling range dis-
play
an elapsed time display
an air intake temperature display
a coolant temperature display
an average fuel consumption dis-
play
an instantaneous fuel consump-
tion display
The items shown in each information
display can be selected.
To set or select the items shown, see
page 3-16.
Odometer display:
Tripmeter displays:
“TRIP-1” and “TRIP-2” show the dis-
tance traveled since they were last set
to zero.
When approximately 3.9 L (1.03 US
gal, 0.86 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter starts flashing. In addition, the
information display will automatically
change to the fuel reserve tripmeter
mode “TRIP-F” and start counting the
distance traveled from that point.
In that case, pushing the select switch
switches the display between the vari-
ous information displays in the follow-
ing order;
TRIP-F
→
Display–1
→
Display–2
→
Display–3
→
TRIP-F
To reset a tripmeter, use the select
switch to select the information display
that contains the tripmeter. Push the
1. Information display
2. Display–1
3. Display–2
4. Display–3
GEAR
N
5.0
TRIP-1
km
7.0
TRIP-2
km
km
20
ODO
GEAR
N
11
RANGE
km
12.3
FUEL AVG
km/L
km/L
12.3
CRNT FUEL
GEAR
N
25
A.TEMP
˚C
Lo
C.TEMP
˚C
0:06
TIME TRIP
3
4
2
1
20
ODO
km
5.0
TRIP-1
km
7.0
TRIP-2
km
GEAR
4
3.4
TRIP-F
km
U2BSE1E0.book Page 13 Thursday, July 31, 2014 4:31 PM
