Yamaha XR1800Z, Ower'S Manual, Page: 10 / 110

1
S
AFETY
I
NFORMATION
1-6
11
12 15
13
16
17
14
SEVERE INJURY OR DEATH MAY
RESULTS IF YOU IGNORE ANY OF
THE FOLLOWING.
• Turn off and remove both ignition
keys, remove lanyard, and wait
for all movement to stop before
removing access port caps.
• Never override interlocks to run
engines with hatch open.
YAMAHA GP1-U418G-10
YAMAHA U418K-00
Lock access port cap securely in place.
A loose cap could be forced out of the port by water pressure,
causing loss of performance and possible damage.
BEFORE LAUNCHING:
• Make sure drain plug at the back
of the hull is tightened securely.
• See Owner's Manual for draining
procedure.
YAMAHA F0R-U419C-10
After removing from the water:
• Flush drive system and hull with fresh water. Open the
drain plug at the back of the hull.
• Start the engine and rapidly move throttle lever from
idle to half-throttle and back for 10~15 seconds to drain
any leftover water in exhaust system.
• Refer to the Owner's Manual for complete maintence
and storage information.