Yamaha XP530E-A Page 64 Owner'S Manual Download

Page: 64 / 124

Instrument and control functions

5-31

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch

is set to “ ”.

3. Turn the vehicle power on.
4. Keep the front or rear brake applied.
5. Push the “ON/ ” switch.

Does the engine start?

With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the “ON/ ” switch.

Does the engine start?

With the engine still running:
9. Move the sidestand down.

Does the engine stall?

The system is OK.

The scooter can be

ridden.

The sidestand switch may not be
working correctly.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The brake switch may not be working
correctly.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The sidestand switch may not be
working correctly.

The scooter should not be ridden

until

checked by a Yamaha dealer.

WARNING

• The vehicle must be placed on the

centerstand during this inspection.

• If a malfunction is noted, have a

Yamaha dealer check the system
before riding.

YES

BV1-28199-E0.book 31 ページ２０１６年１２月１９日　月曜日　午前１１時２５分

Summary of Contents for XP530E-A





























































































































Search results

Summary of Contents for XP530E-A

Reviews:

Related manuals for XP530E-A

Brands by name

Popular brands

Yamaha XP530E-A, Owner'S Manual

Search results

Summary of Contents for XP530E-A

Reviews:

Related manuals for XP530E-A

Brands by name

Popular brands