manualshive.com logo in svg

Yamaha XP530E-A, Owner'S Manual, Page: 5 / 124

Share
Download
Yamaha XP530E-A Owner'S Manual Download Page 5

Introduction

EAU10114

Welcome to the Yamaha world of motorcycling!
As the owner of the XP530E-A/XP530-A/XP530D-A, you are benefiting from
Yamaha’s vast experience and newest technology regarding the design and man-
ufacture of high-quality products, which have earned Yamaha a reputation for de-
pendability.
Please take the time to read this manual thoroughly, so as to enjoy all advantages
of your XP530E-A/XP530-A/XP530D-A. The Owner’s Manual does not only in-
struct you in how to operate, inspect and maintain your scooter, but also in how to
safeguard yourself and others from trouble and injury.
In addition, the many tips given in this manual will help keep your scooter in the
best possible condition. If you have any further questions, do not hesitate to con-
tact your Yamaha dealer.
The Yamaha team wishes you many safe and pleasant rides. So, remember to put
safety first!
Yamaha continually seeks advancements in product design and quality. There-
fore, while this manual contains the most current product information available at
the time of printing, there may be minor discrepancies between your scooter and
this manual. If there is any question concerning this manual, please consult a
Yamaha dealer.

WARNING

EWA12412

Please read this manual carefully and completely before operating this
scooter.

BV1-28199-E0.book  1 ページ  ２０１６年１２月１９日　月曜日　午前１１時２５分

Summary of Contents for XP530E-A





























































































































Reviews:

No comments