manualshive.com logo in svg

Yamaha XMAX Sport, Owner'S Manual

Share
Download
Yamaha XMAX Sport Owner'S Manual Download Page 88

A

ABS (for ABS models)..............................3-13
ABS warning light (for ABS models) ..........3-4
Acceleration and deceleration ...................5-3
Air filter and V-belt case air filter 

elements ................................................6-15

Anti-theft alarm (optional) ........................3-11
Auxiliary light bulb, replacing...................6-30

B

Battery......................................................6-25
Brake fluid level, checking .......................6-21
Brake fluid, changing ...............................6-22
Brake lever, front ......................................3-12
Brake lever, rear .......................................3-12
Brake levers, lubricating ..........................6-22
Braking .......................................................5-3

C

Care............................................................7-1
Catalytic converters .................................3-16
Centerstand and sidestand, checking 

and lubricating .......................................6-23

Coolant.....................................................6-13
Cowlings and panels, removing and 

installing...................................................6-8

D

Dimmer switch .........................................3-11

E

Engine break-in ..........................................5-4
Engine oil .................................................6-10
Engine trouble warning light ......................3-4

F

Final transmission oil ...............................6-12
Front and rear brake lever free play.........6-19
Front and rear brake pads, checking ......6-20

Front fork, checking .................................6-24
Fuel ..........................................................3-15
Fuel consumption, tips for reducing..........5-4
Fuel tank cap ...........................................3-14
Fuses, replacing.......................................6-26

H

Handlebar switches .................................3-11
Hazard switch ..........................................3-12
Headlight bulb, replacing.........................6-28
High beam indicator light...........................3-4
Horn switch..............................................3-12

I

Identification numbers ...............................9-1
Ignition circuit cut-off system ..................3-20
Immobilizer system ....................................3-1
Indicator and warning lights ......................3-4

L

License plate light bulb, replacing ...........6-30

M

Main switch/steering lock ..........................3-2
Maintenance and lubrication, periodic ......6-4
Maintenance, emission control system .....6-3
Matte color, caution ...................................7-1
Model label ................................................9-1
Multi-function display ................................3-6

P

Parking .......................................................5-5
Part locations .............................................2-1
Pass switch ..............................................3-12

S

Safe-riding points.......................................1-5
Safety information......................................1-1
Seat ..........................................................3-17
Securing bracket......................................3-17

Shock absorber assemblies, adjusting....3-19
Sidestand .................................................3-20
Spark plug, checking .................................6-9
Specifications.............................................8-1
Speedometer .............................................3-5
Start switch ..............................................3-12
Starting off .................................................5-2
Starting the engine.....................................5-1
Steering, checking ...................................6-24
Storage.......................................................7-3
Storage compartments ............................3-18

T

Tachometer ................................................3-6
Tail/brake light bulb or rear turn signal 

light bulb, replacing ...............................6-29

Throttle cable free play, adjusting............6-16
Throttle grip and cable, checking and

lubricating ..............................................6-22

Tires .........................................................6-17
Tool kit........................................................6-2
Troubleshooting .......................................6-30
Troubleshooting charts ............................6-32
Turn signal indicator lights .........................3-4
Turn signal light bulb (front), replacing ....6-29
Turn signal switch ....................................3-12

V

Valve clearance ........................................6-17
Vehicle identification number.....................9-1

W

Wheel bearings, checking........................6-25
Wheels .....................................................6-19

INDEX

Summary of Contents for XMAX Sport



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands