manualshive.com logo in svg

Yamaha XMAX Sport, Owner'S Manual

Share
Download
Yamaha XMAX Sport Owner'S Manual Download Page 64

EWA10511

Never overload your vehicle. Ope-
ration of an overloaded vehicle
could cause an accident.

Tire inspection

1. Tire tread depth
2. Tire sidewall

The tires must be checked before
each ride. If the center tread depth
reaches the specified limit, if the tire
has a nail or glass fragments in it, or if
the sidewall is cracked, have a Yama-
ha dealer replace the tire immediately.

TIP

The tire tread depth limits may differ
from country to country. Always
comply with the local regulations.

Tire information

This model is equipped with tubeless
tires.
After extensive tests, only the tires lis-
ted below have been approved for
this model by Yamaha Motor España
S. A.

EWA10470

G

Have a Yamaha dealer replace
excessively worn tires. Besides
being illegal, operating the
vehicle with excessively worn
tires decreases riding stability
and can lead to loss of control.

G

The replacement of all wheel
and brake related parts, inclu-
ding the tires, should be left to
a Yamaha dealer, who has the

WARNING

Front tire:

Size:

120/70-15 M/C 56P(PIRELLI-
METZELER)-56S(MICHELIN)

Manufacturer/model:

PIRELLI / GTS23
MICHELIN / GOLD STANDARD
MICHELIN / CITYGRIP
METZELER / FEELFREE

Rear tire:

Size:

140/70-14 M/C 68P(PIRELLI-
METZELER)-68S(MICHELIN)

Manufacturer/model:

PIRELLI / GTS24
MICHELIN / GOLD STANDARD
MICHELIN / CITYGRIP
METZELER / FEELFREE

Minimum tire tread depth (front
and rear):

1.6 mm (0.06 in)

1

2

ZAUM0054

WARNING

PERIODIC MAINTENANCE AND ADJUSTMENT

6-18

6

After extens

i

ve tests, only the t

i

res  l

i

s-

ted below have been approved for th

i

s 

model by Yamaha Motor Co

.

, Ltd

.

Summary of Contents for XMAX Sport



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands