Yamaha XMAX 250i Owner'S Manual Download

Page: 70 / 92

1. Headlight bulb holder

TIP

The removal procedure depends on
the type of bulb holder installed on
your vehicle.

4. Place a new bulb into position,

and then secure it with the bulb
holder.

5. Install the bulb cover, and then

connect the coupler.

6. Install the cowling.
7. Have a Yamaha dealer adjust the

headlight beam if necessary.

EAUT1261

Replacing a front turn signal
light bulb

ECA10670

NOTICE

It is advisable to have a Yamaha
dealer perform this job.

1. Place the scooter on the centers-

tand.

2. Remove cowling A. (See page

6-6).

3. Remove the socket (together

with the bulb) by turning it coun-
terclockwise.

1. Turn signal light bulb socket

4. Remove the burnt out bulb by

pushing it in and turning it coun-
terclockwise.

5. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

6. Install the socket (together with

the bulb) by turning it clockwise.

7. Install the cowling.

PERIODIC MAINTENANCE AND ADJUSTMENT

6-28

1C0-F8199-E5.QXD 3/10/08 05:56 Página 70

Summary of Contents for XMAX 250i





























































































Search results

Summary of Contents for XMAX 250i

Reviews:

Related manuals for XMAX 250i

Brands by name

Popular brands

Yamaha XMAX 250i, Owner'S Manual

Search results

Summary of Contents for XMAX 250i

Reviews:

Related manuals for XMAX 250i

Brands by name

Popular brands