Yamaha XMAX 250i Owner'S Manual Download

Page: 30 / 92

1. Seat open position

To close the seat

1. Fold the seat down, and then

push it down to lock it in place.

2. Remove the key from the main

switch if the scooter will be left
unattended.

TIP

Make sure that the seat is properly
secured before riding.

EAUT1712

Storage compartments

Front storage compartment

1. Front storage compartment

EWA11191

WARNING

●

Do not exceed the load limit of
1 kg (2.2 lb) for the front stora-
ge compartment.

●

Do not exceed the maximum
load of 180 kg (397 lb) for the
vehicle.

Rear storage compartment

1. Rear storage compartment

The rear storage compartment is
located under the seat. (See page
3-14).

ECAT1030

NOTICE

Keep the following points in mind
when using the storage compart-
ment.

●

Since the storage compart-
ment accumulates heat when
exposed to the sun, do not sto-
re anything susceptible to heat
inside it.

INSTRUMENT AND CONTROL FUNCTIONS

3-15

1C0-F8199-E5.QXD 3/10/08 05:56 Página 30

Summary of Contents for XMAX 250i





























































































Search results

Summary of Contents for XMAX 250i

Reviews:

Related manuals for XMAX 250i

Brands by name

Popular brands

Yamaha XMAX 250i, Owner'S Manual

Search results

Summary of Contents for XMAX 250i

Reviews:

Related manuals for XMAX 250i

Brands by name

Popular brands