Yamaha XL700Y WaveRunner Owner'S/Operator'S Manual Download | Manualshive

Page: 53 / 105

background image

E

3-15

Check state and local laws before operat-
ing your water vehicle. Read the Boat
Handling Instructions issued by the U.S.
Coast Guard for basic safe boating infor-
mation.

Select a wide area to learn in, where visi-
bility is good and other boat traffic is
light. Have someone in a boat accompany
you if operating far from shore. Keep the
proper distance from other boats and
vehicles. Do not ride where people are
swimming.

Always attach the engine stop switch lan-
yard to your left wrist before operating.
You must always wear a U.S. Coast
Guard approved personal flotation device.
Strong streams of water from the jet noz-
zle, or impact with the water surface can
be dangerous. You must wear a wetsuit.
Normal swimming attire may not ade-
quately protect you. A wetsuit will help
protect against internal injuries to orifices
(rectum and vagina) from strong jet
streams, and from impact with the water
surface. Wetsuits also help protect
against hypothermia (low body tempera-
ture) and abrasions.
You should wear water shoes to help pro-
tect feet from objects hidden under water.
Wearing gloves can also help protect
hands from abrasions.
Wind, water, and glare from the sun may
get in your eyes while you operate your
water vehicle, reducing your ability to see.
You may want to consider wearing eye
protection such as sunglasses or goggles
while riding. Some may find, however,
that eye protection obstructs or distorts
their vision, and distracts from operation.

EJU00468

RIDING YOUR WATER VEHICLE

GETTING TO KNOW YOUR WATER
VEHICLE

Riding your water vehicle requires skills
acquired through practice over a period of
time. Take the time to learn the basic
techniques well before attempting more
difficult maneuvers.

Riding your new water vehicle can be a
very enjoyable activity, providing you
with hours of pleasure. But it is essential
to familiarize yourself with the operation
of the water vehicle to achieve the skill
necessary to enjoy riding safely. Before
you begin to ride be sure you have read
this Owner’s Manual completely and
understand the operation of the controls.
Pay particular attention to the safety infor-
mation on pages 1-6 to 1-12. Read all cau-
tion and warning labels on your water
vehicle.

Also read the Riding Practice Tips booklet
supplied with your vehicle.

Remember: Your water vehicle is
designed for one operator and two pas-
sengers only. Never have more than three
people on the vehicle at any time.

EJU00474

LEARNING TO RIDE YOUR WATER
VEHICLE

Before riding, always perform the Pre-
Operation Checks listed on page 3-3. The
short time spent checking the machine’s
condition will reward you with added
safety and a more reliable water vehicle.

«
...
51
52
53
54
55
...
»

Summary of Contents for XL700Y WaveRunner










































































































Reviews:

No comments

Related manuals for XL700Y WaveRunner

Brand: MSSC Pages: 28

Brand: Hallberg-Rassy Pages: 61

Brand: COBIA Pages: 39

Brand: Cobalt Digital Inc Pages: 136

Brand: SEALINE Pages: 61

Brand: Ocean Kayak Pages: 7

Brand: Vanguard Pages: 8

Brand: Sailfish Pages: 44

SUN ODYSSEY 42 DS

Brand: Jeanneau Pages: 30

SUN ODYSSEY 50DS

Brand: Jeanneau Pages: 156

Brand: Intex Pages: 13

Brand: Quicksilver Pages: 49

HAPPY CAT LIGHT

Brand: grabner Pages: 44

FX High Output WaveRunner 2007

Brand: Yamaha Pages: 116

Brand: Jeanneau Pages: 9

Brand: BENETEAU Pages: 116

Bass Hound 10.2

Brand: KL Industries Pages: 10

Brand: Wellcraft Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands