manualshive.com logo in svg

Yamaha XL700Y WaveRunner, Owner'S/Operator'S Manual

Share
Download
Yamaha XL700Y WaveRunner Owner'S/Operator'S Manual Download Page 75

4-7

NOTE:

A service manual is available for purchase
through a Yamaha water vehicle dealer
for owners who have the mechanical
skills, tools, and other equipment neces-
sary to perform maintenance not covered
by this owner’s/operator’s manual.

OWNER’S MANUAL AND TOOL KIT

It is advisable always to carry the Owner’s
Manual and Tool Kit with you whenever
you use the water vehicle. For the conve-
nience of the user, a storage space is pro-
vided on the vehicle.(Refer to “STORAGE
CONTAINER / STORAGE COMPART-
MENT”) To protect these materials from
water, it would be a good idea to put
them in a vinyl bag.
The service information included in this
manual is intended to provide you, the
owner, with the necessary information for
completing your own preventive mainte-
nance and minor repairs. The tools pro-
vided in the owner’s tool kit are sufficient
for this purpose, except that a torque
wrench is also necessary to properly
tighten nuts and bolts.

1

Storage space for tool kit and 
Owner’s Manual

2

Tool kit

q

GU2091

w

GP7-092

E

Summary of Contents for XL700Y WaveRunner










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands