PERIODIC MAINTENANCE AND ADJUSTMENT
7-34
2. Remove the multi-function meter
unit bolts, and then lift up the meter
to unhook its projections from the
slots in the meter stay.
3. Remove the headlight unit by re-
moving the bolts.
4. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
5. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
6. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
7. Install the headlight bulb cover,
and then connect the coupler.
8. Fit the projection on the headlight
unit into the grommet in the head-
light stay, and then install the
headlight unit by installing the
bolts.
1. Multi-function meter unit
2. Bolt
1. Projection
2. Slot
1
2
1
2
1. Headlight unit
2. Bolt
1. Headlight bulb cover
2. Headlight coupler
1
2
2
2
1
1. Headlight bulb holder
2. Headlight bulb
1
2
U20S20E0.book Page 34 Wednesday, October 15, 2008 2:05 PM
ProCarManuals.com
