manualshive.com logo in svg

Yamaha XC125RR, Owner'S Manual, Page: 52 / 84

Share
Download
Yamaha XC125RR Owner'S Manual Download Page 52

PERIODIC MAINTENANCE AND ADJUSTMENT

6-15

1

2

3

4

5

6

7

8

9

EAUT4180

Air filter and V-belt case air 
filter elements

The air filter and V-belt case air filter el-
ements should be cleaned or replaced
at the intervals specified in the periodic
maintenance and lubrication chart.
Check both filter elements more fre-
quently if you are riding in unusually
wet or dusty areas. The air filter check
hose must be frequently checked and
cleaned if necessary.

Replacing the air filter element

1. Place the scooter on the center-

stand.

2. Remove the screw cover and then

remove the air filter case cover by
removing the screws.

3. Pull the air filter element out.

4. Insert a new air filter element into

the air filter case. 

NOTICE:

 Make

sure that the air filter element is

properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.

[ECA10482]

5. Install the air filter case cover by in-

stalling the screws and the screw
cover.

Cleaning the air filter check hose

1. Check the hose on the rear side of

the air filter case for accumulated
dirt or water.

2. If dirt or water is visible, remove

the hose, clean it, and then install
it.

Cleaning the V-belt case air filter el-
ement

1. Remove the V-belt air filter case

cover by removing the bolts.

1. Screw cover

2. Air filter case cover

3. Air filter check hose

1. Air filter element

2

1

3

1

U2PEE0E0  15 ページ  ２０１４年４月１８日 金曜日 午後４時９分

Summary of Contents for XC125RR





















































































Reviews:

No comments