manualshive.com logo in svg

Yamaha XC125RR, Owner'S Manual, Page: 26 / 84

Share
Download
Yamaha XC125RR Owner'S Manual Download Page 26

INSTRUMENT AND CONTROL FUNCTIONS

3-11

1

2

3

4

5

6

7

8

9

To close the seat

1. Fold the seat down, and then push

it down to lock it in place.

2. Remove the key from the main

switch if the scooter will be left un-
attended.

TIP

Make sure that the seat is properly se-
cured before riding.

EAUT4170

Passenger footrest

To use the passenger footrest, push
the footrest inward and it will pop out as
shown.
To retract the passenger footrest, push
it back to its original position.

EAU14302

Helmet holder

The helmet holder is located under the
seat.

To secure a helmet to the helmet 
holder

1. Open the seat. (See page 3-10.)
2. Attach the helmet to the helmet

holder, and then securely close the
seat. 

WARNING! Never ride with

a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.

[EWA10162]

1. Passenger footrest

1

1. Helmet holder

1

U2PEE0E0  11 ページ  ２０１４年４月１８日 金曜日 午後４時９分

Summary of Contents for XC125RR





















































































Reviews:

No comments