Yamaha XC125RR, Owner'S Manual, Page: 21 / 84

INSTRUMENT AND CONTROL FUNCTIONS
3-6
2
3
4
5
6
7
8
9
TIP
If the oil change tripmeter is reset be-
fore the initial 1000 km (600 mi), the
next periodic oil change interval will be
at every 3000 km (1800 mi) thereafter.
Clock
To set the clock:
1. Set the display to “ODO”, then
press the “RESET” button for at
least three seconds.
2. When the hour digits start flashing,
push the “SELECT” button to set
the hours.
3. Push the “RESET” button, and the
first minute digit will start flashing.
4. Push the “SELECT” button to set
the first minute digit.
5. Push the “RESET” button and the
second minute digit will start flash-
ing.
6. Push the “SELECT” button to set
the second minute digit.
7. Push the “RESET” button to start
the clock.
TIP
If you do not push the “SELECT” or the
“RESET” button within 30 seconds, the
setting of the clock will not be complet-
ed and the display will change to “ODO”
mode.
EAU1234H
Handlebar switches
Left
Right
1. Horn switch “ ”
2. Turn signal switch
3. Pass switch “PASS”
4. Dimmer switch
1. Start switch “ ”
3 2 1
4
1
U2PEE0E0 6 ページ ２０１４年４月１８日 金曜日 午後４時９分