Yamaha WR450F 2022, Owner'S Manual

Page: 20 / 176

INCLUDED PARTS
1-10
3. Install the removed CCU and side cover (left).
Connecting to the CCU wireless network
NOTICE
ECA26060
The CCU (Communication Control Unit) uses
weak radio waves. The CCU may not work in
the following situations.
• The CCU is placed in a location exposed to
strong radio waves or other electromagnet-
ic noise
• There are facilities nearby that are emitting
strong radio waves (TV or radio towers,
power plants, broadcasting stations, air-
ports, etc.)
• You are carrying or using communication
equipment such as radios or mobile
phones in close proximity of the CCU
• The CCU is in contact with or covered by a
metallic object
• Other vehicles equipped with a CCU are
nearby
In such situations, move the CCU to another
location and perform the operation again.
1. Turn on the smartphone.
2. For two minutes after the start switch is
pressed or while the engine is running (the
CCU is activated), input the CCU serial num-
ber into your smartphone and establish a
wireless connection.
3. Activate the Power Tuner app.
TIP
If the CCU wireless network cannot be detected,
operate the start switch again.
EAM30008
COUPLER FOR CONNECTING OPTIONAL
PART (For Canada)
The coupler “1” is used for connecting the op-
tional Power Tuner and so on.
NOTICE
ECA24810
When no optional parts, etc. are connected,
connect the connection terminal to the origi-
nal coupler.
Before disconnecting the coupler, thorough-
ly wipe off any mud or water stuck to it.
The Power Tuner is an optional part.
1. CCU coupler
2. Holder
3. CCU (Communication Control Unit)
3. CCU (Communication Control Unit)
a. CCU serial number
1
2
3
P/N: - -
S /N:
MAC:
COMMUN.CONT.UNIT A SS Y.
3
a
Part name Part number
GYTR POWER TUNER 33D-859C0-11-00
1