Pre-operation checks
55
Operate the shift lever several times to make
sure that operation is smooth throughout the
whole range. Also, make sure that the reverse
gate moves up and down according to the
operation of the shift lever and that the gate
makes contact with the stoppers. (See page
30 for reverse system operation.)
EJU32595
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.
Make sure that there is the proper amount of
throttle lever free play when the throttle lever
is in the fully closed (idle) position.
EJU40113
Remote control transmitter check
Make sure that the remote control transmitter
operates properly. (See page 26 for Yamaha
Security System setting procedures and
page 31 for Low RPM Mode activation pro-
cedures.)
EJU32664
Engine shut-off cord (lanyard) check
Make sure that the engine shut-off cord (lan-
yard) is not damaged. If the cord is damaged,
replace it.
WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
1
Stopper
1
1
Throttle lever free play
Throttle lever free play:
4.0–7.0 mm (0.16–0.28 in)
1
UF2M73E0.book Page 55 Friday, August 2, 2013 11:28 AM
Summary of Contents for WaveRunner VX1800-N 2014
Page 12: ...General and important labels 6 3 4 UF2M73E0 book Page 6 Friday August 2 2013 11 28 AM ...
Page 13: ...General and important labels 7 UF2M73E0 book Page 7 Friday August 2 2013 11 28 AM ...
Page 97: ...UF2M73E0 book Page 3 Friday August 2 2013 11 28 AM ...
Page 98: ...Printed in U S A August 2013 0 7 1 CR UF2M73E0 book Page 1 Friday August 2 2013 11 28 AM ...