Yamaha VZ225C, Owner'S Manual, Page: 97 / 124

E
4-22
6) With the outboard motor in a vertical
position, and using a flexible or pressur-
ized filling device, inject the gear oil into
the gear oil drain screw hole.
7) When the oil begins to flow out of the
oil level plug hole, insert and tighten the
oil level plug.
8) Insert and tighten the gear oil drain
screw.
VZ225, VZ250
9) Securely install the cooling water inlet
covers on both sides of the gear case
using the bolt and nut removed earlier.
EMU14622
INSPECTING AND REPLACING
ANODE(S)
Yamaha outboard motors are protected
from corrosion by sacrificial anodes. Inspect
the external anodes periodically. Remove
scales from the surfaces of the anodes.
Consult a Yamaha dealer for replacement of
external anodes.
c C
Do not paint anodes, as this would ren-
der them ineffective.
NOTE:
Inspect ground leads attached to external
anodes on equipped models. Consult a
Yamaha dealer for inspection and replace-
ment of internal anodes attached to the
power unit.
601033
001682
603024
Gear oil grade and capacity:
See “Specifications” in this chapter.
60V-9-13-4 7/28/03 5:37 PM Page 23