PERIODIC MAINTENANCE AND MINOR REPAIR
11. Install the rubber coolant drain
plugs, and then install the cylinder
drain plug covers.
1. Screw (x 4)
1. Rubber coolant drain plug (x 4)
7. Remove the cylinder drain plug
covers on the outside of the cylin-
der blocks by removing the
8 .
9 .
N O T E :
Check the rubber plugs for damage
Remove the rubber coolant drain
and replace them if necessary.
plugs to drain the coolant from the
12.
engine.
Turn the coolant drain cock to
“OFF”.
After the coolant is completely 13.
drained, thoroughly flush the cool-
ing system with clean tap water.
Install the water pump drain bolt,
14.
and then tighten it to the specified
torque.
Pour the recommended coolant
into the reservoir to the maximum
level, and then install the cap.
Pour the recommended coolant
into the radiator until it is full.
1 0 .
N O T E :
Check the washer for damage and re-
place it if necessary.
6 - 1 9
Summary of Contents for Vmax VMX12N
Page 1: ......
Page 10: ......
Page 27: ...INSTRUMENT AND CONTROL FUNCTIONS Damping force Minimum soft 1 Standard 1 Maximum hard 4 3 14 ...
