Yamaha VINO YJ50RAR Page 53 Owner'S Manual Download

Page: 53 / 74

6-15

PERIODIC MAINTENANCE AND MINOR REPAIR

Batteries produce explosive
hydrogen gas. Therefore, keep
sparks, flames, cigarettes,
etc., away from the battery and
provide sufficient ventilation
when charging it in an
enclosed space.

KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

To install the battery

1. Connect the battery coupler, and

then place the battery in the orig-
inal position.

2. Install the battery box cover by

installing the screw.

3. Install the panel.

To remove the battery

1. Remove panel A. (See page 6-4

for panel removal and installation
procedures.)

2. Remove the battery box cover by

removing the screw.

3. Pull the battery out from the bat-

tery box, and then disconnect the
battery coupler.

Battery box cover

Screw

Battery coupler

Battery

5LY-9-13 (US) 4/23/02 4:16 PM Page 51

Summary of Contents for VINO YJ50RAR











































































Search results

Summary of Contents for VINO YJ50RAR

Reviews:

Related manuals for VINO YJ50RAR

Brands by name

Popular brands

Yamaha VINO YJ50RAR, Owner'S Manual

Search results

Summary of Contents for VINO YJ50RAR

Reviews:

Related manuals for VINO YJ50RAR

Brands by name

Popular brands