Yamaha VINO YJ50RAR Owner'S Manual Download

Page: 21 / 74

3-1

EAU00027

INSTRUMENT AND CONTROL FUNCTIONS

EAU00029

Main switch/steering lock

The main switch/steering lock con-
trols the ignition and lighting systems,
and is used to lock the steering. The
various positions are described
below.

EAU04384

All electrical circuits are supplied with
power, the taillight and meter lighting
come on, and the engine can be
started. The key cannot be removed.

NOTE:

The headlight comes on as soon as
the engine is started.

LOCK

OFF

EAU00040

LOCK

The steering is locked, and all electri-
cal systems are off. The key can be
removed.

EAU00038

OFF

All electrical systems are off. The key
can be removed.

EAU04470

The 2-stroke engine oil level warning
light should come on. See page 3-2
for an explanation of the engine oil
level warning light.

5LY-9-13 (US) 4/23/02 4:16 PM Page 19

Summary of Contents for VINO YJ50RAR











































































Search results

Summary of Contents for VINO YJ50RAR

Reviews:

Related manuals for VINO YJ50RAR

Brands by name

Popular brands

Yamaha VINO YJ50RAR, Owner'S Manual

Search results

Summary of Contents for VINO YJ50RAR

Reviews:

Related manuals for VINO YJ50RAR

Brands by name

Popular brands