Yamaha VINO YJ50RAR Owner'S Manual Download

Page: 30 / 74

3-10

EAU00262

Helmet holder

The helmet holder is located under
the seat.

To secure a helmet to the helmet
holder

1. Open the seat. (See page 3-9 for

opening procedures.)

2. Attach the helmet to the helmet

holder, and then securely close
the seat.

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

EAU03450

Storage compartment

There is a storage compartment
under the seat. (See page 3-9 for
seat opening and closing proce-
dures.)

EWA00005

Do not exceed the load limit of
5 kg (11 lb) for the storage
compartment.

Do not exceed the maximum
load of 75 kg (165 lb) for the
vehicle.

Storage compartment

EW000030

Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.

To release the helmet from the hel-
met holder

Open the seat, remove the helmet
from the helmet holder, and then
close the seat.

5LY-9-13 (US) 4/23/02 4:16 PM Page 28

Summary of Contents for VINO YJ50RAR











































































Search results

Summary of Contents for VINO YJ50RAR

Reviews:

Related manuals for VINO YJ50RAR

Brands by name

Popular brands

Yamaha VINO YJ50RAR, Owner'S Manual

Search results

Summary of Contents for VINO YJ50RAR

Reviews:

Related manuals for VINO YJ50RAR

Brands by name

Popular brands