manualshive.com logo in svg

Yamaha VINO XC50Z, Owner'S Manual

Share
Download
Yamaha VINO XC50Z Owner'S Manual Download Page 50

6-50

1

2

3

4

5

6

7

8

9

EAU1722A

PERIODIC MAINTENANCE AND ADJUSTMENT

Valve clearance<IXE>

Tires<IXE>

EAU21401

Valve clearance

The valve clearance changes with use,
resulting in improper air-fuel mixture and/
or engine noise. To prevent this from
occurring, the valve clearance must be
adjusted by a Yamaha dealer at the in-
tervals specified in the periodic mainte-
nance and lubrication chart.

EAU21912

Tires

To maximize the performance, durabil-
ity, and safe operation of your scooter,
note the following points regarding the
specified tires.

Tire air pressure

The tire air pressure should be checked
and, if necessary, adjusted before each
ride.

EWA10511

WARNING

Never overload your vehicle. Opera-
tion of an overloaded vehicle could
cause an accident.

Tire air pressure* (measured on cold
tires):

Front:

150 kPa (1.50 kgf/cm

2

, 22 psi)

Rear:

175 kPa (1.75 kgf/cm

2

, 25 psi)

Tire inspection

Always check the tires before operating
the scooter. If a tire tread shows cross-

wise lines (minimum tread depth), if the
tire has a nail or glass fragments in it,
or if the sidewall is cracked, contact a
Yamaha dealer immediately and have the
tire replaced.

Minimum tire tread depth (front and
rear):

1.0 mm (0.04 in)

Tire information

This scooter is equipped with panel
wheels and tubeless tires.
After extensive tests, only the tires
listed below have been approved for this
model by Yamaha Motor Co., Ltd.

Front tire:

Size:

90/90-10 41J

Manufacturer/model:

MAXXIS/C922

Rear tire:

Size:

90/90-10 41J

Manufacturer/model:

MAXXIS/C922

6-14

Summary of Contents for VINO XC50Z





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands