Yamaha VERSITY 300 VP300 Owner'S Manual Download

Page: 39 / 84

OPERATION AND IMPORTANT RIDING POINTS

5-4

CAUTION:

ECA11660

After 1000 km (600 mi) of operation,
be sure to replace the engine oil and
final transmission oil.

1600 km (1000 mi) and beyond

The vehicle can now be operated nor-
mally.

CAUTION:

ECA10270

If any engine trouble should occur
during the engine break-in period,
immediately have a Yamaha dealer
check the vehicle.

EAU17212

Parking

When parking, stop the engine, and
then remove the key from the main
switch.

WARNING

EWA10310

●

Since the engine and exhaust
system can become very hot,
park in a place where pedestri-
ans or children are not likely to
touch them.

●

Do not park on a slope or on soft
ground, otherwise the vehicle
may overturn.

CAUTION:

ECA10380

Never park in an area where there
are fire hazards such as grass or
other flammable materials.

Summary of Contents for VERSITY 300 VP300





















































































Search results

Summary of Contents for VERSITY 300 VP300

Reviews:

Related manuals for VERSITY 300 VP300

Brands by name

Popular brands

Yamaha VERSITY 300 VP300, Owner'S Manual

Search results

Summary of Contents for VERSITY 300 VP300

Reviews:

Related manuals for VERSITY 300 VP300

Brands by name

Popular brands