Yamaha VERSITY 300 VP300 Owner'S Manual Download

Page: 27 / 84

INSTRUMENT AND CONTROL FUNCTIONS

3-12

EAUM1181

Storage compartment

To unlock the storage compartment

Insert the key in the lock and turn it 1/4
turn clockwise.

To open the storage compartment
when it is unlocked

Turn the knob 1/4 turn clockwise. The
knob will return to its original position
after released.

To close the storage compartment

Push the lid into the original position.

To lock the storage compartment

Insert the key in the lock and turn it 1/4
turn counterclockwise, and then re-
move the key.

WARNING

EWA10960

●

Do not exceed the load limit of 1
kg (2.2 lb) for the storage com-
partment.

●

Do not exceed the maximum
load of 202 kg (445 lb) for the ve-
hicle.

EAUM1490

Storage compartment

To open the storage compartment

Push on the “

” mark of the storage

compartment lid.

To close the storage compartment

Push the lid into the original position.

WARNING

EWA11160

Do not store heavy items in this
compartment.

1. Lock

2. Front storage compartment A

OPEN

UNLOCK

LOCK

OPEN

OPEN

UNLOCK

LOCK

OPEN

UNLOCK

LOCK

ZAUM0411

1. Front storage compartment B

ZAUM0412

Summary of Contents for VERSITY 300 VP300





















































































Search results

Summary of Contents for VERSITY 300 VP300

Reviews:

Related manuals for VERSITY 300 VP300

Brands by name

Popular brands

Yamaha VERSITY 300 VP300, Owner'S Manual

Search results

Summary of Contents for VERSITY 300 VP300

Reviews:

Related manuals for VERSITY 300 VP300

Brands by name

Popular brands