Yamaha Venture XVZ13TFSX, Owner'S Manual

Page: 25 / 126

INSTRUMENT AND CONTROL FUNCTIONS
3-8
3
EAU12660
Engine stop switch “ / ”
Set this switch to “ ” before starting
the engine. Set this switch to “ ” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12710
Start switch “ ”
Push this switch to crank the engine
with the starter.
CAUTION:
ECA10050
See page 6-1 for starting instruc-
tions prior to starting the engine.
EAU42390
The oil level warning light and coolant
temperature warning light will come on
when the key is turned to “ON” and the
start switch is pushed, but this does not
indicate a malfunction.
EAU12765
Hazard switch “ ”
With the key in the “ON” position, use
this switch to turn on the hazard lights
(simultaneous flashing of all turn signal
lights).
The hazard lights are used in case of
an emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
CAUTION:
ECA10061
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
EAU12780
Cruise control switches
See page 3-5 for an explanation of the
cruise control system.
EAU12820
Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-19.)
1. Clutch lever
U2C912E0.book Page 8 Tuesday, June 12, 2007 9:27 AM