Yamaha Venture XVZ13TFSX, Owner'S Manual

Page: 52 / 126

AUDIO SYSTEM AND CB RADIO
4-14
4
3. Repeatedly push either side of the
up/down switch for less than one
second until the desired preset
number (“1” through “6”) is dis-
played.
NOTE:
Selecting “A” will automatically pro-
gram the preset stations. See the fol-
lowing section.
4. Push the “SELECT” button once
for less than one second to store
the radio station selected in step 1
under the preset number selected
in step 3.
5. Repeat this procedure to preset
other radio stations.
Using automatic tuning
1. Select a frequency band. (See the
“Selecting a frequency band” sec-
tion.)
2. Push the “SELECT” button once
for two seconds or more. The radio
frequency and preset station num-
ber “1” (to the right of “CH.”) start
flashing.
3. Push either side of the up/down
switch once for one second or
more to tune in a station automati-
cally.
4. Repeatedly push either side of the
up/down switch for less than one
second until the desired preset
number (“1” through “6”) is dis-
played.
5. Push the “SELECT” button once
for less than one second to store
the radio station selected in step 3
under the preset number selected
in step 4.
6. Repeat this procedure to preset
other radio stations.
Programming preset radio stations
automatically
Up to six stations can be programmed
automatically for each frequency band
(FM1, FM2, FM3, and AM) as follows.
NOTE:
This function works best in areas with
strong radio signals.
1. Select a frequency band. (See the
“Selecting a frequency band” sec-
tion.)
2. Push the “SELECT” button once
for two seconds or more. The radio
frequency and preset station num-
ber “1” (to the right of “CH.”) start
flashing.
3. Repeatedly push either side of the
up/down switch for less than one
second until “A” (automatic) ap-
pears in the display.
U2C912E0.book Page 14 Tuesday, June 12, 2007 9:27 AM