Yamaha Venture XVZ13TFMW, Owner'S Manual

Page: 46 / 124

AUDIO SYSTEM AND CB RADIO
4-8
4
NOTE:
When the fade level is set to “0”, the
front and rear speaker levels are the
same.
Adjusting the intercom volume
1. Repeatedly push the “SELECT”
button for less than one second
until the intercom volume (e.g.,
“IC:10”) appears in the display.
2. Repeatedly push either side of the
up/down switch for less than one
second until the desired volume is
displayed. The intercom volume
can be set between “0” and “20”.
Adjusting the auto volume
When riding the vehicle, external noise
may override the audio system output
volume. The audio system features an
automatic volume control function
which compensates for external noise.
1. Repeatedly push the “SELECT”
button for less than one second
until the auto volume (e.g., “AV: 3”)
appears in the display.
2. Repeatedly push either side of the
up/down switch for less than one
second until the desired volume is
displayed. The auto volume can
be set between “0” and “5”.
Turning on/off the CB roger beep
1. Repeatedly push the “SELECT”
button for less than one second
until either “RB:on” (roger beep on)
or “RB:oF” (roger beep off) ap-
pears in the display.
2. Repeatedly push either side of the
up/down switch for less than one
second to change the setting.
Intercom operation
Provided both the rider and passenger
are wearing headsets, they can talk to
each other through the intercom at any
time. (See the “Adjusting the intercom
volume” section.)
U2C911E0.book Page 8 Tuesday, May 16, 2006 5:13 PM