Yamaha Venture XVZ13TFMW, Owner'S Manual

Page: 22 / 124

INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
NOTE:
After setting the clock, be sure to push
the “SELECT” button before turning the
key to “OFF”, otherwise the clock will
not be set.
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards “E” (Empty) as the fuel level
decreases. When only one segment is
left near “E” (Empty), refuel as soon as
possible. When the key is turned to
“ON”, all of the display segments of the
fuel meter will appear one after the oth-
er and then disappear in order to test
the electrical circuit.
NOTE:
This fuel meter is equipped with a self-
diagnosis system. If the electrical circuit
is defective, all the display segments
will start flashing. If this occurs, have a
Yamaha dealer check the electrical cir-
cuit.
EAU11840
Cruise control system
This model is equipped with a cruise
control system designed to maintain a
set traveling speed.
Activating and setting the cruise
control system
The cruise control system can only be
activated when riding in 4th or 5th gear
at speeds between 50 km/h (30 mi/h)
and 130 km/h (80 mi/h).
To activate and set the cruise control
system:
1. Push the “CRUISE” switch to the
left. The “ON” indicator light will
come on.
2. Press the “SET/DEC” (set/deceler-
ate) side of the cruise control
switch to activate the cruise control
system. The “SET” indicator light
comes on.
3. Set the desired traveling speed as
follows. Press the “RES/ACC” (re-
sume/accelerate) side of the
cruise control switch to increase
the set speed or the “SET/DEC”
side to decrease the speed.
1. “CRUISE” switch
1. Cruise control switch
2. “CANCEL” switch
U2C911E0.book Page 5 Tuesday, May 16, 2006 5:13 PM