manualshive.com logo in svg

Yamaha Vector RS90RX, Owner'S Manual

The Yamaha Vector RS90RX is a high-performance snowmobile designed for thrill-seekers and outdoor enthusiasts. Unlock the full potential of this powerful machine by downloading the comprehensive Owner's Manual. Get the manual for free at manualshive.com, ensuring you have all the necessary information to maximize your snowmobiling experience.

Share
Download
background image

Introduction

ESU10120

Congratulations on your purchase of a
Yamaha snowmobile. This model is the result
of Yamaha’s vast experience in the produc-
tion of fine sporting and touring snowmobiles.
It represents the high degree of craftsmanship
and reliability that have made Yamaha a lead-
er in these fields.
This manual will give you an understanding of
the operation, inspection, and basic mainte-
nance of this snowmobile. If you have any
questions concerning the operation or main-
tenance of your snowmobile, please consult a
Yamaha dealer.
To maintain the high quality and performance
of this snowmobile, it is important that you and
your Yamaha dealer pay close attention to the
recommended maintenance schedules and
operating instructions contained within this
manual.

RS90RX

RS90GTX

RS90GTAX

RS90LTX

RS90LTGTX

OWNER’S MANUAL

©2007 by Yamaha Motor Corporation, 

U.S.A.

1st Edition, April 2007

All rights reserved.

Any reprinting or unauthorized use 

without the written permission of

Yamaha Motor Corporation, U.S.A.

is expressly prohibited.

Printed in Japan.

P/N LIT-12628-02-70

U8GM10E0.book  Page 1  Friday, April 27, 2007  6:43 PM

Summary of Contents for Vector RS90RX



























































































Reviews:

No comments

Related manuals for Vector RS90RX

Brands by name

Popular brands

Load more brands