Yamaha Vector RS90RX, Owner'S Manual

Page: 29 / 90

Control functions
23
Rebound damping force
The rebound damping force of each ski shock
absorber can be adjusted by turning the re-
bound damping force adjusting knob.
To increase the rebound damping force, turn
the adjusting knob in direction (a). To de-
crease the rebound damping force, turn the
adjusting knob in direction (b).
NOTE:
The damping forces will not decrease past the
minimum levels even if the adjusting knobs
are turned out more than the minimum set-
tings.
ESU10980
Adjusting the rear suspension spring
preload
The rear suspension spring preload can be
adjusted by turning the spring preload adjust-
ing ring on the shock absorber.
1. Compression damping force adjusting knob
Compression damping setting:
Minimum (soft):
12 click(s) in direction (b)*
Standard:
7 click(s) in direction (b)*
Maximum (hard):
2 click(s) in direction (b)*
* With the adjusting knob fully turned in
direction (a)
1. Rebound damping force adjusting knob
Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
12 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting knob fully turned in
direction (a)
1. Spring preload adjusting ring
Spring preload setting (spring seat length
or spring preload adjusting ring position):
Minimum (soft):
1
Standard:
4
Maximum (hard):
7
* The spring seat length changes ap-
proximately 1.5 mm (0.06 in) with each
full turn of the adjusting ring.
U8GM10E0.book Page 23 Friday, April 27, 2007 6:43 PM