INSTRUMENT AND CONTROL FUNCTIONS
3-10
3
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts and passenger
seat holder, and then pull the rider
seat up.
To install the rider seat
1. Insert the projections on the front
of the rider seat into the seat hold-
ers as shown, and then place the
seat in the original position.
2. Install the passenger seat holder
and bolts.
3. Install the passenger seat.
NOTE:
Make sure that the seats are properly
secured before riding.
Tightening torque:
Passenger seat nut:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)
1. Projection
2. Seat holder
1. Bolt
2. Passenger seat holder
1. Projection
2. Seat holder
U3B81RE0.book Page 10 Friday, June 10, 2005 1:06 PM
Summary of Contents for V-Star XVS11V
Page 1: ...3B8 28199 1R XVS11V C XVS11AWV C XVS11ATV C OWNER S MANUAL LIT 11626 19 71...
Page 2: ...EAU10041 U3B81RE0 book Page 1 Friday June 10 2005 1 06 PM...
Page 97: ...CONSUMER INFORMATION 9 8 9 U3B81RE0 book Page 8 Friday June 10 2005 1 06 PM...
Page 102: ...PRINTED IN JAPAN 2005 06 3 8 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD...