Yamaha V-Star XVS11V, Owner'S Manual

Page: 34 / 102

INSTRUMENT AND CONTROL FUNCTIONS
3-15
3
XVS11V
XVS11AWV/XVS11ATV
6. Install the mudguard and ignitor
unit panel by installing the quick
fasteners.
NOTE:
To install a quick fastener, push the pin
back so that it will protrude from the fas-
tener head, and then insert the fastener
and push the protruding pin in until it is
flush with the fastener head.
7. Install the rider seat.
WARNING
EWA10220
This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
● Do not tamper with or attempt to
open the gas cylinder.
1. Spring preload adjusting ring
2. Position indicator
3. Special wrench
1. Position indicator
2. Spring preload adjusting ring
3. Special wrench
Spring preload setting:
Minimum (soft):
1
Standard:
XVS11V 3
XVS11AWV 4
XVS11ATV 4
Maximum (hard):
XVS11V 7
XVS11AWV 9
XVS11ATV 9
1. Quick fastener (after removal)
2. Quick fastener (before installation)
U3B81RE0.book Page 15 Friday, June 10, 2005 1:06 PM