
Tyros / TRS-MS01
16
4.
The PC Circuit Board
(Time required: about 10 min)
4-1
Separate the unit into the upper case assembly and the
lower case assembly. (See procedure 1)
4-2
Remove the four (4) screws marked [180]. The PC cir-
cuit board can then be removed. (Fig.7)
[120]
[120]
[120]
[120]
[A]
[A]
[120]
[120]
[120]
[130a]
[130b]
[130b]
[120]
[130b]
Lower Box
[a]
[b]
[c]
[d]
[e]
(Fig.2)
(Fig.4)
(Fig.3)
(Fig.5)
[120]:
Bind Head Tapping Screw-B 4.0X12 MFZN2BL (VR138400)
[130]:
Bind Head Tapping Screw-B 3.0X12 MFZN2Y (VE683000)
[a]: POWER W.H Ass’y
[b]: VR1 W.H Ass’y
[c]: GND8 W.H Ass’y
[60]
Harddisk (Option)
(Fig.6)
[d]: FFC2 W.H Ass’y
[e]: LED W.H Ass’y
5
REG Circuit Board
(Time required: about 10 min)
5-1
Separate the unit into the upper case assembly and the
lower case assembly. (See procedure 1)
5-2
Remove the four (4) screws marked [580]. The REG
circuit board can then be removed. (Fig.7)